RQ02001(2-inlet 2-outlet air + electric integrated Slip ring)

2 inlet and 2 outlet air + electric rotary joint, G1/8" joint, pipe diameter 6-8mm.

Hybrid power lines, signal lines, Ethernet, USB, industrial buses, control lines, solenoid valves, induction lines, etc. The standard is flange installation form, and hollow shaft installation can be customized. The media that can pass through are: Compressed air, hydrogen, nitrogen, chemical mixed gases, steam, cooling water, hot water, hot oil, petroleum, sulfuric acid, beverages, etc.

Size drawing of RQ02001 (2 inlets and 2 outlets, 6-8mm air pipe, pure pneumatic rotary joint)

Size diagram of RQ02001 (2 inputs and 2 outputs, 6-8mm air pipe) +6-56 2A signals (applicable to solenoid valves and induction switches)

RQ02001 (2 inputs and 2 outputs, 6-8mm air tubes) + Signal 5A/10A dimension diagram

Note:

N 10A current loops combined can be used as one N*10A current loop.

For example:

Two loops of 10A are combined and used as one route of 20A.

The 10A and signal (5A) can be combined freely, with a maximum of 96 channels. For more details, please consult the customer service.

Non-standard customization is available on standard products. Please consult customer service.

Note:

Six colors form a group, and the numbers are respectively 1... 6. The next group starts from 7... 12. Repeat the first six colors, and each group is identified by a number tube as the group number.

Note:

The following special requirements can all be customized. The delivery time will increase by 3 to 15 days, and the cost will increase by 5% to 50%. Most of the basic accessories of our company are standardized and modularized. Non-standard customization can also greatly reduce costs and delivery time.

① The lead-out method and lead-out length of the rotor and stator can be customized.

② Due to structural limitations, it can be customized according to the specified length, height or outer diameter.

③ It can support up to 200 power currents or signals at most.

④ Optional aviation plugs, terminals and heat shrink tubes are available.

⑤ Mixed slip rings for servo system signals, power lines and encoder lines of Yaskawa, Panasonic, Siemens, etc.

⑥ Capable of mixed high-speed data transmission (including Ethernet, USB, RS232,RS485,Profibus, CanBUS,CANOPEN, DeviceNET, CC-LINK, ProfiNET, EtherCAT and various other industrial buses).

⑦ Mixing of temperature control signals and thermocouple signals.

⑧ Customized for shockproof, high-temperature and other special environments.

⑨ It can be integrated with pneumatic and hydraulic rotary joints as a gas-electro-hydraulic slip ring.

⑩ High-temperature customization can reach up to 500 degrees.

⑪ High voltage can be customized up to 110kV.

⑫ High speed 10,000 RPM.

⑬ Current up to 5000 amperes (A).

⑭ Military grade.

⑮ Waterproof, underwater mode optional, IP65,IP68 optional.

⑯ Requirements for stainless steel housing.