Through-hole conductive slip rings are a general term for a series of conductive slip rings with holes in the center, mainly used for transmitting precise signals, weak currents, large currents, and high voltages

Conductive Slip Ring, commonly known as conductive slip ring or collector ring, is a special electrical connection device used to transmit electrical energy or signals between rotating parts and fixed parts.

Standard series integral precision conductive slip rings with an outer diameter of 185mm and a through hole diameter of 100mm (applicable to <=100mm).

If an inner hole of less than 100mm is required, it can be solved by adding an inner lining bushing.

Standard series integral precision conductive slip rings with an outer diameter of 185mm and a through hole diameter of 100mm (applicable to <=100mm).

If an inner hole of less than 100mm is required, it can be solved by adding an inner lining bushing.

Standard series integral precision conductive slip rings with an outer diameter of 185mm and a through hole diameter of 90mm (applicable to <=90mm).

If an inner hole of less than 90mm is required, it can be solved by adding an inner lining bushing.

Standard series integral precision conductive slip rings with an outer diameter of 158mm and a through hole diameter of 80mm (applicable to <=80mm).

If an inner hole of less than 80mm is required, it can be solved by adding an inner lining bushing.

Standard series integral precision conductive slip rings with an outer diameter of 158mm and a through hole diameter of 70mm (applicable to <=70mm).

Standard series integral precision conductive slip rings with an outer diameter of 130mm and a through hole diameter of 60mm (applicable to <=60mm).

If an inner hole of less than 60mm is required, it can be solved by adding an inner lining bushing.

Standard series integral precision conductive slip rings with rotor flange and through hole diameter of 50mm (applicable to <=50mm).

If an inner hole of less than 50mm is required, it can be solved by adding an inner lining bushing.

Standard series integral precision conductive slip rings with an outer diameter of 119mm and a through hole diameter of 50mm (applicable to <=50mm).

If an inner hole of less than 50mm is required, it can be solved by adding an inner lining bushing.

Rotor flange installation, outer diameter 99mm, through hole diameter 38.1mm (applicable to <=38.1mm).

The standard series of integral precision conductive slip rings.

The outer diameter is 99mm, and the through hole diameter is 38.1mm. It is suitable for the standard series of integral precision conductive slip rings with an outer diameter of <=38.1mm.